JVC KW-NT500HDT Instructions Manual page 91

To fine-tune the DTA for the listening
position:
You can select the listening position here to set a better
sound field for the people inside the vehicle.
1
Select a listening position.
2
Touch <Customize>.
3
Touch the button of the speaker to be
adjusted.
4
Touch or of <Delay> or <Level>and
adjust it.
When using <Delay> to adjust the DTA, input the
actually measured distance.
In this case, when <All Seats> is selected in
Position, specify the distance from the center of
the all seats, and when <Front All> is selected,
specify the distance from the midpoint between
the right and left seats.
EN_KW-NT500HDT_NT300[J].indb 91 EN_KW-NT500HDT_NT300[J].indb 91
Furthermore, if <Level> is used for the
adjustment, adjust the DTA while listening to the
sound.
5
Repeat steps 3 and 4 to set all of the
speakers.
• When the sizes of the rear speaker and
subwoofer are set to <None>, the DTA of those
speakers cannot be adjusted.
• If you touch <Reset> in step 3, a confirmation
message appears. If you touch [Yes], all speaker
adjustments of the listening position under
adjustment are returned to the default settings.
91
Setting the Sound
12/7/2011 1:06:34 PM 12/7/2011 1:06:34 PM