Panasonic WL18A User Manual

Download this manual

GENERAL

This device is the WLAN+BT module adapter IEEE802.11a/b/g/n/ac, dual band 2x2 Wi-Fi

+Bluetooth® adapter.

Integration to the end product

1. WL18A module is mounted in the main board.

2. Insert Antenna unit into Antenna connectors of WL18A module.

Technical Specification

a) Dimensions (H x W x D):

b) Weight:

c) IEEE WLAN Standard:

d) Bluetooth:

e) Antenna Diversity:

f) Operating Temperature:

g) Humidity:

h) Host interface:

FCC ID :ACJ9TGWL18A

WLAN+BT module adapter

Model number: WL18A

22mm x 30mm x 2.4mm

2.8g

IEEE802.11a/b/g/n/ac

BDR, EDR, Low energy

Supported

-10 to 50 degree Celsius

30 to 80 %RH

USB2.0 and PCIe v2.1 Gen1

User Manual

Page 1 +Bluetooth® adapter. Integration to the end product 1. WL18A module is mounted in the main board. 2. Insert Antenna unit into Antenna connectors of WL18A module. Technical Specification a) Dimensions (H x W x D): 22mm x 30mm x 2.4mm b) Weight: 2.8g...
Page 2 FCC ID :ACJ9TGWL18A Regulatory Information Federal Communications Commission Radio Frequency Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 3 If other radio devices are to be integrated with this module, an additional evaluation and FCC submission may be required. Integrators are responsible for such additional evaluation and FCC submission. The following information must be indicated on the host device of this module; Model : WL18A FCC ID : ACJ9TGWL18A IC : 216H-CFWL18A...