NEC NECNP04LM1 User Manual page 28

Lower bandwidth mode
GO channel list
GO SSID suffix
GO intent (0-15)
UoIP
UoIP bandwidth limit (100-
10000)
Wi-Fi bands
Group owner
limit the bandwidth used for WiDi.
Default is "Disabled".
[Setting]
1) Disabled : Set the mode to the low bandwidth mode.
2) Enabled : Do not set the mode to the low bandwidth mode.
Set the Wi-Fi operating channels that the WiDi Enterprise Class Sink will use when
it is a P2P group owner.
[Setting]
"1"/"2"/"3"/"4"/"5"/"6"/"7"/"8"/"9"/"10"/"11"/"36"/"40"/"44"/"48"
Set a suffix to be used in the creation of the P2P group SSID.
[Setting]
1*4(vchar)
Set the intent of the device with respect to being the group owner when
establishing a P2P group.
Default is "0".
[Setting]
"0"/"1"/"2"/"3"/"4"/"5"/"6"/"7"/"8"/"9"/"10"/"11"/"12"/"13"/"14"/"15"
get and set whether the UoIP protocol is permitted.
Default is "Prohibited".
[Setting]
1) Permitted : Permit UoIP
2) Prohibited : Prohibit UoIP
Set the bandwidth limit for UoIP data traffic.
Default is "1000Kbit".
[Setting]
100~10000 [Kbit]
Set the frequency bands over which WiDi sessions will be supported. The setting
allows all bands, 2.4 GHz only, or 5 GHz only.
Default is "ALL".
[Setting]
1) ALL : Use both 2.4GHz/and 5GHz
2) 2.4GHz : Use only 2.4GHz
3) 5GHz : Use only 5GHz
Set the P2P group owner policy.
Default is "Negotiate P2P GO".
[Setting]
1) Negotiate P2P GO
2) Autonomously acts as GO
English-26