NEC NECNP04LM1 User Manual page 30

Item
Display Time
Transition type
Transition Time
Settings
Set the time for displaying still images.
Use the number keys on the remote control to enter the time.
[Settings]
Selection range: 10-999 sec
Setting unit: 1 sec
[Setting Method]
(1) Press the SET button after selecting this setting.
(2) Press the - (minus) button to clear the current setting time.
(3) Use the number buttons to enter the display time and then press the SET
button.
Specify the transition type.
[Settings] <Transition Image>
1) Fade-in
Image 1
2) Fade-out
Image 1
3) Cross-fade
Image 1
4) None
NOTE:
• Only one type of image transition can be specified.
• When cross-fade is selected, the switchover between videos will be fade-out
followed by fade-in.
Video 1
Fade-out Fade-in
• This setting does not support audio.
Set the time for the fade-in, fade-out and cross-fade.
Use the number keys on the remote control to enter the time.
[Settings]
Setting range: 1-5 sec
Setting unit: 1 sec
[Setting Method]
(1) Press the SET button after selecting this setting.
(2) Press the - (minus) button to clear the current setting time.
(3) Use the number buttons to enter the image transition time and then press the
SET button.
English-28
Image 2
Image 2
Image 2
Image 1 Image 2
Video 2 Still image
Cross-fade (Transition time)
Image 3
(Transition time)
Image 3
(Transition time)
Image 3
(Transition time)
Image 3
(Transition time)