Fujitsu 628WSL110H2 User Manual page 6

■ Warnings
Warning Type of
level danger
Injury
Burn
Caution
Fire
Electric
shock
Pay attention so that your fingers, hairs, etc. may not be
withdrawn into the moving parts such as gear, belt, etc. to avoid
a risk of injury.
When replacing the paper, be careful not to jam your fingers
with the paper cover or not to touch the paper cutter. There is a
risk of personal injury due clipping or contact with the cutter
blade.
Surely turn off the printer power and check that the printer head
is sufficiently cooled down before cleaning: Hot printer head may
cause a burn.
The printer generates heat when in operation. Accordingly, pay
special consideration to the radiation of heat in the mounting
design because it may cause a burn.
Since the motor gets a high temperature during its operation, do
not touch it directly. Since heat is not radiated immediately after
the motor is stopped, touching it at this stage may cause a burn.
Since the printer head and its support plate get a high
temperature during printing, do not touch them directly. Since
heat is not radiated immediately after the printer is stopped,
touching it at this stage may cause a burn.
Do not use a voltage other than the specified voltage of power
supply to avoid the risk of fire or electric shock.
Do not put a metal or flammable substance in the inside of the
aperture (for insertion or ejection of paper) to avoid fire or
electric shock.
Do not place the product at a highly humid or dusty place,
poorly ventilated place, fire-hazardous place, or a place where
temperature becomes excessively high. There is a risk of fire or
electric shock.
Do not use the product with wet hand. Avoid spill of liquid such
as drinks, dropping of foreign substance such as clips to avoid
the risk of fire or electric shock.
Surely turn off the printer power before replacing the paper,
changing battery and connecting or removing AC adapter. This
is to avoid the risk of electric shock.
If by any chance the product drops, or it emits heat, smoke,
unusual smell, or abnormal sound, immediately turn off the
power of the product, and then contact your sales agent (or the
maintenance service center).
5
Warning message