Tws Function - Silvercrest LBP 5 A1 Operating Instructions Manual

TWS function

The TWS ("True Wireless Stereo") function allows two speakers to be
connected to each other.
The left speaker is the main speaker which is connected to a Bluetooth
playback device. This speaker transmits the audio signal coming from the
playback device to the right speaker.
®
Bluetooth
If you purchase a second loudspeaker of the same type SLBP 5 A1
(IAN 397052_2107), it is possible to connect both loudspeakers to each
other and use them as a stereo loudspeaker system. You can purchase a
second loudspeaker at www.lidl.co.uk. If the speakers are out of stock,
you can also purchase an additional speaker at www.kompernass.com.
Switching on TWS mode
NOTE
► Do not switch on TWS mode if there is already a Bluetooth
tion between a speaker and a Bluetooth
► Make sure you position the left and right speakers as close as
possible to each other when pairing in TWS mode.
♦ Switch on both speakers.
♦ Press the TWS button
the left speaker) briefly. LED 2
♦ If the pairing of the two speakers has been successful, you will hear a
short beep. LED 2
on the right speaker flashes green.
│ GB │ IE
■ 20
6
on the first speaker (which will function as
5
flashes green during pairing.
5
on the left speaker lights up green and LED 2
playback device.
®
SLBP 5 A1
®
connec-
®
5