Table of Contents
Advertisement
Fault
i-DOS Fehler, i-DOS deakt-
ivieren
"E:60 / -2B"
"E:10 / -10"
All other error codes.
Water cooling
Malfunctions
Fault
The appliance is not work-
ing.
Cause
The pump for the intelligent
dosing system is blocked.
The unbalanced load detec-
tion system has interrupted
the spin cycle because the
laundry is unevenly distrib-
uted.
The filters in the water inflow
are blocked.
The tap is turned off.
The water inlet hose is
kinked or jammed.
Malfunction
To protect the wastewater
pipes, the hot detergent
solution is cooled before be-
ing drained.
Cause
The mains plug of the power
cord is not plugged in.
The circuit breaker is faulty.
There has been a power cut.
Troubleshooting en
troubleshooting
Switch off the appliance.
1.
Clean the pump unit.
2.
→ "Cleaning the detergent drawer",
Page 53
If this indicator appears again, call
3.
our after-sales service.
→ "Customer Service", Page 71
Note: You can start the washing pro-
gramme if you deactivate the intelli-
gent dosing system and dose manu-
ally.
→ "Buttons", Page 26
Redistribute the laundry in the
▶
drum.
Note: Where possible, mix large and
small items in the drum. Different sized
items of laundry distribute themselves
better during the spin cycle.
"Clean the filters in the water in-
▶
flow" → Page 58.
Turn on the tap.
▶
Ensure that the water inlet hose is
▶
not kinked or jammed.
Call the after-sales service.
▶
→ "Customer Service", Page 71
Wait until the detergent solution
▶
has cooled down.
troubleshooting
Connect the appliance to the power
▶
supply.
Check the circuit breaker in the
▶
fuse box.
Check whether the lighting in your
▶
kitchen or other appliances are
working.
61
Advertisement
Table of Contents
