4 Connections
When PC and the camera are in different networks
When the PC and the camera are configured on different networks, connect the PC to the PC port via a switching hub.
Recorder
[Camera/PC port]
IP address: 192.168.0.250
Subnet mask: 255.255.255.0
[PC port]
IP address: 192.168.1.250
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.1
Ethernet cable (locally procured):
category 5e or better (straight) for WJ-NX300K,
category 7 (straight) for WJ-NX300K/G
Network camera (× 32 max.)
(When 2 licenses are used for the additional camera kit)
Note:
• Cameras shall be connected to the camera/PC port. If the camera is connected to the PC port, the camera will not be
detected automatically.
20
(continued)
Ethernet cable (locally procured):
category 5e or better (straight) for WJ-NX300K,
category 7 (straight) for WJ-NX300K/G
PoE hub
Network
IP address: 192.168.1.1
Subnet mask: 255.255.255.0
Switching hub
PC
IP address: 192.168.1.x
(except 0, 1, 250 and 255)
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.1