Advertisement
To Make Adjustments in Flexi-Slice
Rotate
Cut
Plane
1) Place the cursor at one of the extremities of a cut-plane intersection line in one of the cut-
planes. The cursor will change to a
2) Place the cursor in the middle section of a cut-plane intersection line. The cursor is changed to
a
. Drag to translate the cut-plane.
3) Place the cursor at the intersection between two cut-plane lines the cursor is changed to
Both cut-planes are translated simultaneously.
4) Click on a point in the volume rendering to move the intersection of the two other cut-planes to
that location.
•
If Depth Mode is turned on: the reference plane is also moved inside the volume
rendering to the corresponding selected depth.
•
In Depth Mode is turned off: the reference plane is kept at the current depth.
5) Place the cursor at the outer area of one of the cut-planes. The cursor is changed to
to rotate the cut-plane image. The cut-plane lines remain fixed.
6) Place the cursor in the inner area of one of the cut-planes. The cursor is changed to
to pan the cut-plane image. The cut-plane lines remain fixed.
Want to learn more, go to www.vividechoclub.net for online tutorials, webinars and product information.
18
Rotate
Image
Drag to
translate
Cut Plane
. Drag to rotate the cut-plane.
.
. Drag
. Drag
JB83797AU
Advertisement
