Bosch Rexroth AG
Device description
12 Device description
2
1
①
USB connection
②
LEDs for operating and error dis-
playchapter 12.2.1 "Operating and error
display" on page 26
Fig. 12-1: Front of the VEP devices
USB interface on the front panel
The USB interface complies with the USB standard 2.0. The USB interface is
sealed with a screw cap with the degree of protection IP 65. The cap is connec-
ted to the device. Screw on the cap again as soon as the USB interface is not
used anymore.
12.1 Variants
The VEP xx.5 IndraLogic devices are available as built-in and housing devices.
The devices differ in their type code as follows:
Type code
Built-in device
VEP30.5EFU-2G0EP-A3D-NNN-NN-FW ..NN-FW
Housing device
VEP30.5DPU-2G0EP-A3D-NNN-CG-FW ..CG-FW
Tab. 12-1: Differentiation of the housings in the type code
The VEP xx.5 Embedded Terminals are provided as different variants. The devi-
ces differ in the design of the housing.
12.2 Display and operating components
12.2.1 Operating and error display
In the upper part of the front panel, there are four LEDs to display device states
and errors. Depending on the variant, the front panel is either provided with la-
26/41
3
Embedded Terminals with Profibus DP
1
③
Display
④
Keypad
Housing name in the type code
DOK-CONTRL -VEP*XX.5***-IT01-EN-P
Master
3
4