System Presentation; Overview; Device Variants - Bosch Rexroth VCH 08.1 Manual

DOK-SUPPL*-VCH*08.1***-PR02-EN-P
Rexroth IndraControl VCH 08.1 Hand-held Terminal
1

System Presentation

1.1

Overview

1.2

Device Variants

Device
VCH08.1EAB-064ET-
A1D-064-DS-E4-PW
VCH08.1EAB-064ET-
A1D-064-CS-E4-PW
VCH08.1EAB-064ET-
A1D-064-CS-E2-PW
VCH08.1EAB-064ET-
A1D-064-FS-B2-PW
The Hand-held Terminal IndraControl VCH 08.1 is a portable operator and vis‐
ualization device in robust design with Windows CE compatible electronics. The
Hand-held Terminal IndraControl VCH 08.1 is equipped optimally for different
applications due to the use of a powerful processor and the Ethernet interface,
see also chapter 2.4 "Appropriate Use " on page
Rotating mass storage devices, floppy-disk drives and hard-disk drives are not
suitable for harsh operating environments. Therefore the IndraControl VCH
08.1 provides FLASH and RAM memories.
IndraControl VCH 08.1 provides a Windows CE platform. With the VI Composer
applicatons can be added to this platform.
Optional operating and control elements allow to adapt the IndraControl VCH
08.1 to the particular use case.
The IndraControl VCH 08.1 is suitable for the following application ranges:
● Operation and visualization of IndraLogic, IndraMotion MLC, IndraMotion
MTX.
● Configuration of machines and installations.
● Operation and diagnostics of extendend handling installations.
● Visualization of simple operating fields and assembly lines.
E.g. the "automatic" operation mode is available in normal operation modes.
Test runs, configuring, teaching and further options are available in semi-au‐
tomatic or manual special operation modes.
An enabling button and an emergency stop button serve as safety functions on
the IndraControl VCH 08.1.
The machine manufacturer is responsible for the selection of a suitable hand-
held terminal, the wiring of safety components, and the projecting of possible
additional options, based on the risk and hazard analysis.
The Hand-held Terminals IndraControl VCH 08.1 are available in different var‐
iants.
Optional elements
Handwheel, 16-stage over‐
ride
16-stage override
16-stage override, short ex‐
tension cable
16-stage override, short ex‐
tension cable
Fig.1-1: Device Variants IndraControl VCH 08.1
For further information on "Selection of technical safety", please refer to the
sections on the new Machinery Directive in
27.
Safety
Black-gray stop button, ena‐
bling button
Black-gray stop button, ena‐
bling button
Black-gray stop button, ena‐
bling button
Red-yellow emergency stop
button, enabling button
chapter 4 "Technical Data" on page
Bosch Rexroth AG 5/117
System Presentation
12.
Parts number
R911171955
R911171956
R911171057
R911172138