Table of Contents
Advertisement
VCH 05.1
comfortable connection of a hand-held terminal. All clamps for fixed wiring to
the control are located at the rear side of the connection module in the control
cabinet.
VAC 30.2 and VAC 05.1: The connection module VAC 30.2 and VAC
05.1 for hand-held terminals with stop button is equipped with a
fine thread screwed plug at the front side. For the VAC 30.2 connec-
tion module, the integrated "automatic stop button jumpering" al-
lows temporary integration of the hand-held terminal into the safety
circuit of the running machine without accidental stopping the ma-
chine.
VAC 31.1: Hand-held terminals with red-yellow EMERGENCY STOP
pushbuttons can only be temporarily integrated into the safety cir-
cuit if the plant is in safe state or if a certified jumpering mechanism
is available. The connection module VAC 31.1 is equipped for such
devices with a bayonet ending with additional short-circuit connec-
tor. The hand-held terminal may be only connected if the plant is in
safe state. Plugging or unplugging a hand-held terminal during the
operation would immediately set the system to standstill.
The connection modules depend on the safety components of the hand-held ter-
minal:
Actuating element stop
button, EMERGENCY
STOP pushbutton
Jumpering the safety
circuit if the hand-held
terminal is disconnected
17-pin front connector
Enabling device
Tab. 12-1: Connection module design for the hand-held terminal
12.2 Operating System
Due to license reasons, the hand-held terminals are only delivered with an in-
stalled operating system. For more information about the operating system, re-
fer to the project planning manual "Rexroth IndraControl V Devices Operating
Systems" (see
tab. 1-1 "Further documents" on page
DOK-SUPPL*-VCH*05*****-IT02-EN-P
IndraControl VAC 30.2 IndraControl VAC 31.1 IndraControl VAC 05.1
For hand-held terminals
with black-gray stop but-
ton
Automatic stop button
bridging
Fine thread
Lead-through isolated
For hand-held terminals
with red-yellow EMER-
GENCY STOP pushbut-
ton
Short-circuit connector
screwed on
Bayonet ending
Lead-through isolated
2).
Bosch Rexroth AG
Device Description
For hand-held terminals
with black-gray stop but-
ton
–
Fine thread
Lead-through isolated
17/27
Advertisement
Table of Contents
