Table of Contents
Advertisement
VCH 05.1
The type-examination certificate No. is 1069/1.
Safety specifications
EN ISO 13849-1:2008 Category 3 PL d
The safety function "enabling button" for the special operation mode control
and the stop button meet the requirements of category 3 and PL according to
EN ISO 13849-1 and the requirements of EN 60204-1 provided that the safety in-
structions in this document are complied with.
8.4 CE Marking
8.4.1 Declaration of Conformity
The electronic products that are described in the present instructions, comply
with the requirements and the target of the following EU directive and with the
following harmonized European standards:
EC Directive relating to machinery 2006/42/EC
●
EC Directive relating to electromagnetic compatibility 2004/108/EC
●
Conformity with the regulations of the Directive 2006/42/EG is established by
the compliance with the following harmonized European standards for the
EMERGENCY STOP pushbutton and the stop button as well as the enabling but-
ton:
EN ISO 13850:2008
●
EN 60204-1:2006
●
Conformity with the Directive 2004/108/EC is established by the compliance
with the applicable parts of the following harmonized European standards:
EN 61131-2:2007
●
Non-compliance with CE conformity due to modifications to the de-
vice.
The CE marking is only valid for the device in its delivery status. Af-
ter having modified the device, the CE conformity is to be verified.
Ask your representative for the Declaration of Conformity.
8.5 UL/CSA Certified
The devices are certified according to
UL508 (Industrial Control Equipment) and
●
DOK-SUPPL*-VCH*05*****-IT02-EN-P
Bosch Rexroth AG
Standards
11/27
Advertisement
Table of Contents
