Table of Contents
Advertisement
VCH 05.1
Check that cables are not broken or crushed. Replace damaged parts immedi-
●
ately.
14.3 Display
NOTICE
Do not use any solvent, scouring agent or scouring pads for cleaning. Use a soft
cloth, moistened with water or a mild cleaning agent.
A fading backlight causes a progressive deterioration display readability, so that
a replacement is required. For further information, please contact the Bosch
Rexroth Service, see
14.4 Maintenance
The hand-held terminal is designed for use in the industrial environment. No
special maintenance is required.
Keep the device away from humidity, oils and emulsions.
To ensure safe and non-slip handling, the hand-held terminal has to be cleaned
after it has been soiled. Use a soft, dry and lint-free rag for cleaning.
14.5 Updating the Operating System
The operating system is updated using a micro SD card. The image of the ope-
rating systems can be obtained from Bosch Rexroth.
Installation instruction
1. Switch off the system the hand-held terminal is connected to.
2. Backup all available local data and applications.
3. Save the new image on the micro SD card in the root directory under the
name "ce.bin".
4. Insert the micro SD card in the hand-held terminal. The operating system is
automatically installed after the micro SD card has been inserted. The
hand-held terminal cannot be used during the installation.
CAUTION
Switch the system off before the operating system installation.
DOK-SUPPL*-VCH*05*****-IT02-EN-P
Damaging the touch screen due to incorrect
cleaning
chapter 17 "Service and Support" on page
System standstill due to inserting of the
micro SD card!
Bosch Rexroth AG
Maintenance
22.
19/27
Advertisement
Table of Contents
