Config Tool; Rexroth Settings - Bosch Rexroth VCH 08.1 Manual

DOK-SUPPL*-VCH*08.1***-PR02-EN-P
Rexroth IndraControl VCH 08.1 Hand-held Terminal
9.2.5

Config Tool

9.2.6

Rexroth Settings

Fig.9-5: Service dialog
A new password can be specified in the service dialog. From this dialog you
can also reach the "Config Tool" (see
95) and the "Rexroth Settings" (see
95).
Start the Config Tool via the "Config Tool" button in the service dialog, see
9-5 "Service dialog" on page
The following settings are available in the Config Tool:
● Brightness and contrast control (mainly, these settings are made via the
standard application).
● Adjustment and information display of override and handwheel.
● Display of the image version.
● Activation of a system update.
● Testing the foil keyboard.
Please find more detailed information on the setting dialogs in
" Configuration Tool (Config Tool)" on page
Start the Rexroth Settings via the "Rexroth Settings" button in the service dia‐
log, see fig. 9-5 "Service dialog" on page
divided into three tabs ("Network Settings","Application Settings" and "Info
Page").
The "Rexroth Settings" read the network data from the VAC 30.2/31.1 connec‐
tion module, display the network data and allow to edit these values, see the
following figure.
Bosch Rexroth AG
chapter 9.2.5 "Config Tool" on page
chapter 9.2.6 "Rexroth Settings" on page
95.
100.
95. The "Rexroth Settings" dialog is
95/117
Software
fig.
chapter 9.5.3