AEG ADT2304 User Manual page 77

A
B
10. Remove the hole covers of the
middle hinge and put them in the
holes on the opposite side.
11. Tilt the appliance carefully on a soft
foam packaging or similar material to
avoid any damage to the back of the
appliance and the floor.
12. Remove both adjustable feet and
unscrew the screws of the lower
hinge.
13. Reverse the lower hinge to the other
side of the appliance, screw it with
screws and install adjustable feet.
14. Install the lower door by placing the
bottom door hole on the bottom hinge
pin. Tighten the screws.
1
3
2
15. Install the middle hinge to the left
16. Fit the upper hole of the lower door
17. Install the upper door by fitting the
18. Put the upper hinge to the left top
19. Take out an upper hinge cover (A)
side of the appliance by reversing its
original position.
on the middle hinge pin. Tighten the
screws.
lower hole of the door on the middle
hinge pin.
side of the appliance. Supporting the
door with your hand put the hinge pin
into the upper hole of the upper door.
Tighten the screws of the upper
hinge.
from a bag. Install it on the upper
hinge. Place the screw hole cover (B)
on the top right side of the appliance
where screw holes are.
ENGLISH 77