Touchpad Cable - HP 530 Maintenance And Service Manual

TouchPad cable

Description
TouchPad cable
Before removing the TouchPad cable, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive (see
a.
Memory/WLAN module compartment cover (see
b.
Optical drive (see
c.
Switch cover (see
d.
Keyboard (see
e.
Display assembly (see
f.
Base enclosure (see
g.
Fan assembly (see
h.
Heat sink (see
i.
System board (see
j.
Remove the TouchPad cable:
Position the top cover with the front toward you.
1.
Battery on page 32).
Hard drive on page 33)
Optical drive on page
Switch cover on page
Keyboard on page 43)
Display assembly on page
Base enclosure on page
Fan assembly on page
Heat sink on page 57)
System board on page
Memory module on page
39)
41)
47)
52)
55)
62)
Component replacement procedures
Spare part number
441638-001
35)
67