Advertisement
Important Safety Instructions
This chapter contains important safety instructions for preventing bodily injury
and/or property damage. Please read carefully, and follow them at all times.
Severity of bodily injury and/or property damage, which could result from incorrect
use of the SFP+ Module, are explained below.
WARNING
This symbol indicates a potential hazard
that could result in serious injury or death.
This symbol indicates safety instructions.
CAUTION
Deviation from these instructions could lead to
bodily injury and/or property damage.
The following symbols are used to classify and describe the type of instructions to be
observed.
This symbol is used to alert
users what they must not do.
WARNING
Do not look at the laser light.
Deviation could lead to visual impairment. (Class 1 Laser Product)
Do not disassemble and/or modify this SFP+ Module.
Deviation could lead to fire, electric shock, and/or equipment failure.
CAUTION
Handle the SFP+ Module carefully so that fingers or hands may not be
injured by its end connected to the Ethernet Switch or the SFP+
extension slot of the Ethernet Switch.
This symbol is used to alert
users what they must do.
Basic Instructions for the Use of This Product
For inspection and/or repair, consult the retailer.
Correctly and securely connect the SFP+ Module to the SFP+ extension slot
of a Panasonic Ethernet Switch.
Check the connector of the fiber optic cable for dirt and dust. If it is dirty,
be sure to clean it before connecting it to the fiber optic port.
Remove the SFP+ Module from the SFP+ extension slot before cleaning the
SFP+ Module.
Do not touch the metal terminal or place electrically-charged objects in the
proximity of the SFP+ Module. Static electricity could lead to breakdown.
Please use the SFP+ Module in locations where the ambient temperature is
within the range of 0 to 50°C.
Do not use the SFP+ Module in any condition where the specification limits
are exceeded.
Deviation could lead to malfunctions.
1. Panasonic will not be liable for any damage resulting from the operation not in
accordance with this document or the loss of communications, which may or
may not be caused by failure and/or malfunction of this product.
2. The contents described in this document may be changed without prior notice.
3. For any question, please contact the retailer where you purchased the product.
Troubleshooting
If you find any problem, please take the following steps to check.
The port LED of the Ethernet Switch to which the SFP+ Module connected is not lit.
Is the Ethernet Switch powered on?
Is the SFP+ Module securely connected to the target SFP+ extension slot of the
Ethernet Switch?
Is the connected port of the Ethernet Switch enabled?
Is the cable correctly connected to the target port?
Is a conforming cable used? Is the same type of SFP+ Module used on the
opposite end?
Is the equipment connected to the target port compliant with the specified
standards?
Ensure that 100BASE-FX or 1000BASE-X equipment is not connected.
Advertisement
