Table of Contents
Advertisement
SMPTE-C, Standard. The default value is Standard.
13 Grayscale mode: The default value is OFF.
ON: Color only black and white effect .
Off: Normal color effect.
14 6-axis Saturate: Adjust saturation of red, green, blue, yellow, magenta and cyan 6-axis
Hue: Adjust hue for red, green, blue, yellow, magenta and cyan.
OSD Menu
The OSD menu is used for adjusting the OSD menu location and the timeout setting.
1 Press the Menu button to bring up the OSD menu.
<
>
2 Press the
/
button to select
OSD menu.
<
>
3 Press the
/
10 seconds.
Setting Menu
The Setting menu is used for adjusting the general settings for current input signal such
as aspect ratio, OSD language, and etc.
Setting
Wide Mode
DDC/CI
OD
ACM
Input
DP Format
DTS
Language
1 Press the Menu button to bring up the OSD menu.
<
>
2 Press the
/
button to select
Setting menu.
OSD
OSD Timeout
OSD and press the Menu button to enter the
button to adjust the OSD Timeout (10 ~ 120 seconds), the default is
Full
ON
Normal
OFF
HDMI
DP1.2
OFF
English
Setting and press the Menu button to enter the
10
Setting
Auto Source
ON
Quick Start mode
ON
Refresh Rate Num
OFF
Reset
13
Advertisement
Table of Contents
