Table of Contents
Advertisement
The following options are available in the Setting menu: Wide Mode, DDC/CI, OD,
ACM, Input, DP Format, DTS, Language, Auto Source, Quick Start mode, and Reset.
<
>
3 Press the
/
button to enter its sub-menu.
<
>
4 Press the
/
confirm.
5 Wide mode: You can select which screen aspect you are using. The options are Full,
Aspect, and 1:1.
6 DDC/CI: Allows the monitor settings to be set through the software on the PC.
Note: DDC/CI, short for Display Data Channel/Command Interface,
which allows monitor controls to be sent via software.
7 OD: Select Off, Normal, or Extreme.
8 ACM: Turn ACM on or off. The default is off.
9 Input: Select the source from DVI, HDMI, DP, or miniDP.
10 DP Format :Default is DP1.2, can selection DP support DP1.1 or DP1.2 format.
11 DTS: Turn DTS Sound On or Off. Your monitor is equipped with two 3W speakers on
the rear. DTS Sound is stratified and creates a remarkable sonic flow.
12 Language: Set the OSD menu language.
13 Auto Source:The default is "On", can support auto search for signal source in order.
14 Quick start mode: Select Off or On. The default is "Off". Turn on to speed up boot
speed.
15 Refresh rate num: Display the panel's current refresh rate on the screen of
information page if user switch to "ON". The default value is "Off".
Information Menu
The Information menu displays the basic information of the LCD monitor.
1 Press the Menu button to bring up the OSD menu.
2 To view the basic information of the LCD monitor, press the
Information.
3. FPS: Display the panel's current refresh rate on the screen if users switch Refresh rate
num to "ON".
14
button to scroll through the Setting options, and press the Menu
button to adjust/select the setting and press the Auto button to
Information
S/N:ETRLA00803104000502400
3840 X 2160
H:135
V:60Hz
HDMI
FPS:60
<
>
/
button to select
Advertisement
Table of Contents
