HP Compaq Presario,Presario 1234 Brochure page 10

Compaq Global Mini PCI 56k (V.90) Modem by 3Com
Dn Dial
This is the standard Dial command, which is commonly appended with "T" or "P" for
tone or pulse dialing, respectively.
The following may be used as dial string modifiers:
n
L
P
T
R
,
W
@
!
#
*
;
S=n
&
$
En Character Echo Command
This command controls whether the characters entered from your computer keyboard are
echoed back to your monitor while the modem is in command mode.
E0
E1
Result Codes:
0203-0799-A
Phone number, 0 through 9.
Redials last number. Should be the first character following ATD, ignored
otherwise.
Pulse dialing.
Touch-Tone dialing.
Call an originate-only modem.
Pause during dialing. Pause for time specified in Register S8 before processing
the next character in the dial string.
Wait for dial tone. Modem waits for a second dial tone before processing the dial
string.
Wait for answer.
Hook flash. Causes the modem to go on-hook for 0.5 second and then return to
off-hook.
Auxiliary tone dial digit.
Auxiliary tone dial digit.
Return to command mode. Causes the modem to return to command mode after
dialing the number without disconnecting the call.
Dial a telephone number previously stored using the &Zn=x command (see the
&Zn=x Store Telephone Number command for further information). The range
of n is 0 - 3.
Wait for credit card bong.
Display list of dial commands.
Turn command echo off..
Turn command echo on (default).
OK n = 0, 1.
ERROR Otherwise.
10
White Paper