HP Compaq Presario,Presario 1500 Maintenance And Service Manual page 163

h. Top cover, microphone, and TouchPad cable
i.
2. Remove the two TM2.5 × 5.0 screws 1 that secure the optical
drive front alignment rail to the base enclosure (Figure 5-43).
3. Remove the front alignment rail 2 from the base enclosure.
4. Remove the two TM2.5 × 5.0 screws 3 that secure the optical
drive rear alignment rail to the base enclosure.
5. Remove the rear alignment rail 4 from the base enclosure.
Figure 5-43. Removing the Optical Drive Alignment Rails
✎
The optical drive alignment rails are included in the
Miscellaneous Plastics/Hardware Kit, spare part number
285541-001.
Maintenance and Service Guide
(Section 5.20)
Fan (Section 5.21)
Removal and Replacement Procedures
5–57