5. Remove the hard drive by following these steps:
a. Position the computer with the rear panel toward you.
b. Loosen the two PM2.0×6.0 captive screws 1 that secure
c. Lift the right side of the cover 2 and swing it to the left.
d. Remove the hard drive cover.
✎
The hard drive cover is included in the Miscellaneous
Plastics Kits, spare part numbers 394286-001 (for use on
HP Pavilion ze2000 models) and 394287-001 (for use on
Compaq Presario M2000 models).
Removing the Hard Drive Cover
Maintenance and Service Guide
the hard drive cover to the computer.
Removal and Replacement Procedures
5–7