HP Mini 1000 Maintenance And Service Manual page 69

4. If it is necessary to replace the display bezel, flex the inside edges of the bottom (1), left and right
sides (2), and the top (3) of the display bezel until the bezel disengages from the display enclosure,
and then remove the display bezel (4).
The spare part number for the 8.9-inch display bezels is 506333-001.
5. If it is necessary to replace the webcam module, perform the following steps:
a. Open the tab built into the display enclosure shielding that secures the microphone cable, and
then release the microphone (1) from its clip.
b. Release the ZIF connector (2) to which the integrated display/webcam cable is attached, and
then disconnect the cable (3) from the display enclosure. The microphone assembly and
display/webcam cable for all 8.9-inch panels is available in the Display Cable Kit, spare part
number 504597-001 (with WLAN).
Component replacement procedures 61