Rtc Battery - HP Mini 210-1010 Maintenance And Service Manual

RTC battery

Description
RTC battery
Before removing the real-time clock (RTC) battery, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service cover (see
Remove the RTC battery:
▲ Remove the RTC battery from the socket on the system board.
Reverse this procedure to install the RTC battery. When installing the RTC battery, make sure the "+"
sign faces up.
48 Chapter 4 Removal and replacement procedures
Battery on page 38).
Service cover on page
Spare part number
449729-001
40).