4.
Turn the computer upside down, with the front toward you.
5.
Remove the rear rubber feet, and then the 2 Phillips 2.5x5.0 screws (1) under the feet.
6.
Remove the 2 Phillips 2.0x5.0 screws (2) and the 3 Phillips 2.0x4.0 screws (3) that secure the
top cover to the base enclosure.
7.
Turn the computer right-side up, with the front toward you.
8.
Open the computer as far as possible.
9.
Disconnect the speaker cable (1) from the system board.
50
Chapter 4 Removal and replacement procedures