NEC E438 User Manual page 83

Setup
Other settings
Input Labels
Key Lock Settings
IR Lock Settings
Power supply
LED Indicator
Mute Settings
Thermal Management
Signal Information
Monitor Information
Factory Reset
Renames the input terminal currently being displayed. Letters (A-Z), numbers (0-9), and some
symbols can be used.
Prevents the monitor from being controlled using the buttons on the monitor control panel.
OffN: All buttons operate normally.
Mode 1N: Only the power button and the input switching function operate.
Mode 2N: All buttons are locked. (Only the power button can be used during standby mode.)
Prevents the monitor from being controlled using the remote control.
OffN: All buttons operate normally.
Mode 1N: Only the POWER and the SOURCE buttons operate.
Mode 2N: All buttons are locked. (Only the power button can be used during standby mode.)
You can configure the power supply to the USB Type-C port.
The power consumption increases when set to [On].
Set it to Off to turn off the power indicator when the monitor is turned on (normally lit blue).
You can change the effect of the MUTE button of the remote control.
AudioN: Mutes only the audio files.
VideoN: Mutes only the video files.
Audio & VideoN: Mutes the audio and the video files.
The monitor is equipped with thermal sensors and displays a warning when the ambient
temperature exceeds the operation guaranteed temperature. If a warning is displayed, turn the
monitor off since using the monitor in such environment may cause a malfunction.

arning MessageN: A temperature warning is displayed on the screen when the internal
temperature has exceeded the operation guaranteed temperature.
ShutdownN: The monitor turns off automatically when the internal temperature has
exceeded the operation guaranteed temperature.
Displays the information regarding the input signal.
Displays the information regarding the monitor.
All settings except network are returned to factory default.
English - 80