RUGGEDCOM WIN5158-V-GPS
Installation Guide
Section 2.4.2
Mounting the Subscriber Unit to a Pole
The subscriber unit can be attached to any pipe or pole with a diameter of 44.5 to 254 mm (1.75 to 10 in).
To mount the subscriber unit to a pole, do the following:
1.
Attach the subscriber unit to the mounting bracket.
Figure 3: Mounting the Subscriber Unit to a Large Pole
1. Subscriber Unit 2. Pole 3. Clamping Bracket 4. Mounting Bracket 5. M8-25 Hex Screw 6. M8 Spring Washer 7. M8 Flat
Washer 8. M8 Nut 9. M8-70 Hex Screw
Mounting the Subscriber Unit to a Pole
4
3
5
6
7
Installing the Subscriber Unit
1
8
6
7
6
9
Chapter 2
2
3
11