LG S3WF Owner's Manual page 24

OPERATION
24
3
Place the hangers into the slots of the moving
hanger.
The Pants Hanger
Place pants either on the moving hanger or in the
pants crease care, depending on whether
maintaining the creases on the pants legs is
desired.
NOTE
• Hanging pants on the moving hanger may
reduce the creases on pants legs. To maintain
the creases on pants legs, use the pants crease
care.
• Pants should be no wider than 96 cm or longer
than 110 cm to fit in the pants crease care. Check
the size of the pants before using the pants
crease care. If pants are too large, use the
moving hanger.
• The fabric content of the garments affects how
well wrinkles are reduced.
• For optimum results, use the extra pants care
programme which is designed for use with the
pants crease care feature. This programme can
be downloaded using the LG ThinQ and used as
the Downloaded programme.
Opening and Closing the Pants
Hanger
1
To open, fold the hook down toward the
hanger blades to unlock and separate the
blades.
2
Once pants are inserted, bring the blades
together and rotate the hook up and away
from the blades to lock them in place.
Hanging Pants On the Pants Hanger
1
Remove all objects from pants pockets and
button the back pockets.
2
Fold pants along crease lines (or where crease
lines would be), and attach the pants hanger at
the ends of the pants legs.
3
Tug gently on the sides of the pants legs. Make
sure pants are stretched tight within the
hanger, with no wrinkles, and will not fall out of
the hanger during the programme.