Advertisement
Technical data
Dimensions (DxWxH)
60 x 60 x 85 cm
Weight
approximately 35 kg
Max. capacity
7 kg
Condensate container
approx. 4.2 l
Ambient temperature
5 - 35 °C
Connection voltage
220 - 240 V
Connected load
2025 / 2600 W
Fuse protection
16 A / 10 A
Product number
Production number
You can find the rating plate on the back of the dryer.
Consumption rates
Specifications are average values established under normal
operating conditions. Fluctuations of up to 10 % are possible.
Cottons 7 kg
. Cupboard / Cupboard Dry * 1400
1000
800
Iron Dry *
1400
1000
800
Synthetics 3.5 kg
. Cupboard / Cupboard Dry *
800
600
*Test programmes according to DIN EN 61121.
**The values may diverge from those specified depending on over and undervoltage, fabric
type, composition of the laundry to be dried, residual moisture in the fabric and the amount
of the load.
Optional accessories
Washer-dryer stack connection set
The dryer can be placed on top of a suitable washing machine with the same width and depth
WTZ
to save space. The dryer must be fastened on the washing machine with this connection set.
11311
If the worktop of the washing machine is less than 544 mm deep, please consult
the after-sales service or your specialist retailer.
Rating plate or inside of the door
Spin speed in rpm
Drying time** in
(residual moisture)
min incl. 8 min
cooling time
10 A
16 A
(approx. 50 %)
98
90
(approx. 60 %)
117
106
(approx. 70 %)
138
120
(approx. 50 %)
76
66
(approx. 60 %)
91
82
(approx. 70 %)
106
96
(approx. 40 %)
42
40
(approx. 50 %)
53
45
(order from the after-sales service using the order number, depending on model)
What to do if ...
If you cannot rectify a fault yourself (e.g. switching off/on), please contact our after-sales
service. We will always find an appropriate solution and will avoid unnecessary visits by
engineers. Trust the expertise of the manufacturer and rest assured that the repair will be
carried out by trained service technicians using original spare parts. The contact details
of your local after-sales service can be found in the enclosed after-sales service directory,
or by calling one of these numbers:
– GB 0344 892 8979 (Calls charged at local or mobile rate.)
– IE 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.)
When contacting the after-sales service, please quote the appliance's product number
(E no.) and production number (FD) (see the inside of the door).
Set the programme selector to Off and remove the appliance plug from the socket.
Start/Stop indicator lamp
does not light up.
Container empty
Clean
/
Container empty
Clean
/
flashes.
Energy
Dryer does not start.
consumption**
in kWh
10 A
16 A
Programme terminated shortly
3.32
3.32
after the start.
3.92
3.92
Water is leaking out.
4.48
4.48
The door opens by itself.
2.45
2.45
The required degree of dryness
2.94
2.94
was not achieved or the drying
time was too long.
3.43
3.43
1.16
1.16
1.45
1.45
Laundry damp.
The humidity in the room has
increased significantly.
One or more indicator lights are
flashing.
Power failure.
9
Mains plug plugged in?
Programme selected?
/
Empty container for condensation
indicator lights up.
/
Clean the fluff filter under running water
indicator light
Clean the air cooler, if required
Has the
Start/Stop button been pressed?
Door closed?
Programme set?
Ambient temperature greater than 5 °C?
Make sure the dryer is level.
Push the door closed until you hear it engage.
Clean the fluff filter under running water
Empty the container for condensation.
Ambient temperature higher than 35 °C
the room.
Air inlet may be blocked
Unsuitable programme selected?
Dryer installed too closely to other objects? Provide
adequate air circulation.
Mains failure
Restart the dryer.
Fine layer of limescale on the moisture sensors. Clean
the sensors
see page 6.
Use the next drying programme up or use the timed
programme as a supplement
Warm laundry feels damper than it really is!
Make sure the room is sufficiently ventilated.
Air inlet blocked?
Make sure that the air cooler is inserted.
Clean the fluff filter and air cooler
Check the installation conditions
Switch off, allow to cool, switch back on and restart the
programme.
Remove laundry from the dryer immediately and spread
out. This allows the heat to dissipate. Be careful as the
door, the drum and the laundry may be hot.
see page 4.
see page 4.
see page 6.
see page 4.
ventilate
clear obstruction.
see page 7.
see page 7.
Clear obstruction.
see page 4/6.
see page 8.
10
Advertisement
