Pioneer PDP-503CMX Service Manual page 176

PDP-503CMX, PDP-503MXE, PDA-5002
8
Synchronizing signal impedance selector switch
Depending on the connections made at INPUT2, it may
be necessary to set this switch to match the output
impedance of the connected component's
synchronization signal.
When the output impedance of the component's
synchronization signal is above 75 Ω, set this switch to
the 2.2 kΩ position.
9
AUDIO INPUT (Stereo mini jack)
Use to obtain sound when INPUT1, INPUT2 or INPUT5
is selected.
Connect this jack to the audio output connector of the
device connected to the plasma display's INPUT1 or
INPUT2, or to the audio output connector of the device
connected to the video card's INPUT5.
0
AUDIO OUTPUT (Stereo mini jack)
Use to output the audio of the selected source
component connected to the plasma display to an AV
amplifier or similar component.
-
MAIN POWER switch
Use to switch the main power of the plasma display on
and off.
=
AC INLET
A power cable is furnished with the plasma display;
connect one end of the power cable to this connector,
and the other end to a standard AC power source.
~
SPEAKER (L) terminal
For connection of an external left speaker. Connect a
speaker that has an impedance of 8 -16 Ω.
176
Video Card [PDA-5002] Section
The video card is provided with 3 video input connectors, 1
video output connector, and 2 audio input connectors.
!
INPUT5 (DVI-D jack)
Use to connect a computer.
Note: This unit does not support the display of
copyguard-protected video signals.
@
AUDIO INPUT3 (RCA Pin jacks)
Use to obtain sound when INPUT3 is selected.
Connect these jacks to the audio output connectors of
components connected to the video card's INPUT3.
Note: The left audio channel (L) jack is not compatible
with monaural input sources.
#
INPUT3 (S-video jack)
For connection of components that have an S-video
output jack such as a video deck, video camera, laser
disc player, or DVD player.
$
AUDIO INPUT4 (RCA Pin jacks)
Use to obtain sound when INPUT4 is selected.
Connect these jacks to the audio output connectors of
components connected to the video card's INPUT4.
Note: The left audio channel (L) jack is not compatible
with monaural input sources.
%
INPUT4 (BNC jack)
For connection of components that have a composite
video output jack such as a video deck, video camera,
laser disc player, or DVD player.
^
OUTPUT (INPUT4) (BNC jack)
Use the OUTPUT (INPUT4) jack to output the video
signal to an external monitor or other component.
Note: The video signal will not be output from the
OUTPUT (INPUT4) jack when the main power of this
display is off or in standby mode.