Electrolux ESF5533LOX User Manual
Hide thumbs Also See for ESF5533LOX:
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

ESF5533LOX
EN
Dishwasher
ES
Lavavajillas
User Manual
Manual de instrucciones
2
24

Advertisement

Chapters

Table of Contents
loading

Summary of Contents for Electrolux ESF5533LOX

  • Page 1 ESF5533LOX Dishwasher User Manual Lavavajillas Manual de instrucciones...
  • Page 2: Table Of Contents

    14. ADDITIONAL TECHNICAL INFORMATION...........22 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
  • Page 4: Safety Instructions

    The operating water pressure (minimum and • maximum) must be between 0.5 (0.05) / 8 (0.8) bar (MPa) Follow the maximum number of 13 place settings. • If the supply cord is damaged, it must be replaced by •...
  • Page 5 ENGLISH • Connect the mains plug to the mains disconnect the mains plug from the socket only at the end of the mains socket. Contact the Authorised installation. Make sure that there is Service Centre to replace the water access to the mains plug after the inlet hose.
  • Page 6: Product Description

    3. PRODUCT DESCRIPTION Worktop Rinse aid dispenser Upper spray arm Detergent dispenser Lower spray arm Cutlery basket Filters Lower basket Rating plate Upper basket Salt container Air vent...
  • Page 7: Control Panel

    ENGLISH 4. CONTROL PANEL On/off button Start button Programs button Indicators Programme indicators Options button Display Delay button 4.1 Indicators Indicator Description Washing phase. It comes on when the washing phase operates. Drying phase. It comes on when the drying phase operates. TimeManager indicator.
  • Page 8 Programme Degree of soil Programme phases Options Type of load • Normal soil • Prewash • TimeManager • Crockery and • Wash 50 °C • XtraDry cutlery • Rinses • Dry • All • Prewash • XtraDry • Crockery, cut‐...
  • Page 9: Settings

    ENGLISH Water Energy Duration Programme (kWh) (min) 13 - 14 1.0 - 1.1 75 - 85 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. 5.2 Information for test In your request please include the product number code (PNC) found on...
  • Page 10 Softening hard water increases the consumption of water and energy as well as the programme duration. The higher the level of water softener, the higher the consumption and the longer the duration. Water hardness German de‐ French de‐ mmol / l Clarke de‐...
  • Page 11: Options

    ENGLISH If standard detergent or multi-tablets During the drying phase, the without rinse aid are used, activate the door opens automatically notification to keep the rinse aid refill and remains ajar. indicator active. CAUTION! How to deactivate the rinse aid Do not try to close the appliance door within 2 empty notification...
  • Page 12: Before First Use

    Not all options are Every time compatible with each other. activated, XtraDry is off and If you select non compatible needs to be chosen options, the appliance manually. automatically deactivates one or more of them. Only Activating XtraDry deactivates the indicators of the still TimeManager and vice versa.
  • Page 13: Daily Use

    ENGLISH 8.2 How to fill the rinse aid The salt is used to recharge the resin in the water softener and to assure good dispenser washing results in daily use. How to fill the salt container 1. Turn the cap of the salt container counterclockwise and remove it.
  • Page 14 9.2 Setting and starting a Make sure that the appliance is in programme selection mode. programme • If the salt indicator is on, fill the salt container. The Auto Off function • If the rinse aid indicator is on, fill the rinse aid dispenser.
  • Page 15: Hints And Tips

    ENGLISH Press and hold simultaneously Opening the door while the Programs and Options until the appliance operates appliance is in programme selection mode. Opening the door while a programme is running stops the appliance. It may affect Cancelling the programme the energy consumption and the programme duration.
  • Page 16 • In areas with hard and very hard • Remove large food residues from water we recommend to use plain dishes. dishwasher detergent (powder, gel, • Soak cookware with burnt-on food tablets containing no additional before washing it in the appliance.
  • Page 17: Care And Cleaning

    ENGLISH 11. CARE AND CLEANING 3. Remove the flat filter (A). WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the main socket. Dirty filters and clogged spray arms decrease the washing results. Make a check regularly and, if 4.
  • Page 18: Troubleshooting

    11.3 External cleaning • Clean the appliance with a moist soft cloth. • Only use neutral detergents. • Do not use abrasive products, abrasive cleaning pads or solvents. 11.4 Internal cleaning • Carefully clean the appliance, including the rubber gasket of the door, with a soft damp cloth.
  • Page 19 ENGLISH Problem and alarm code Possible cause and solution The program does not • Make sure that the appliance door is closed. start. • Press Start. • If the delay start is set, cancel the setting or wait for the end of the countdown. •...
  • Page 20 Problem and alarm code Possible cause and solution The appliance trips the cir‐ • The amperage is insufficient to supply simultaneous‐ cuit-beaker. ly all the appliances in use. Check the socket amper‐ age and the capacity of the meter or turn off one of the appliances in use.
  • Page 21 ENGLISH Problem Possible cause and solution The dishes are wet. • For the best drying performance activate the option XtraDry and set AirDry . • The programme does not have a drying phase or has a drying phase with low temperature. •...
  • Page 22: Product Information Sheet

    13. PRODUCT INFORMATION SHEET Trade Mark Electrolux Model ESF5533LOX 911516303 Rated capacity (standard place settings) Energy efficiency class Energy consumption in kWh per year, based on 280 standard cleaning cycles using cold water fill and the consumption of the low power modes. The actual energy consumption will depend on how the appli‐...
  • Page 23 ENGLISH Water supply pressure Min. / max. 0.5 (0.05) / 8 (0.8) bar (MPa) Water supply max 60 °C Cold water or hot water 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to decrease energy consumption.
  • Page 24 14. INFORMACIÓN TÉCNICA ADICIONAL............45 PENSAMOS EN USTED Gracias por adquirir un aparato Electrolux. Ha escogido un producto que contiene décadas de experiencia e innovación profesionales. Ingenioso y elegante, se ha diseñado pensando en usted. Así pues, siempre que lo utilice, puede tener la seguridad de que conseguirá...
  • Page 25: Información Sobre Seguridad

    ESPAÑOL INFORMACIÓN SOBRE SEGURIDAD Antes de instalar y utilizar el aparato, lea atentamente las instrucciones facilitadas. El fabricante no se hace responsable de lesiones o daños producidos como resultado de una instalación o un uso incorrectos. Conserve siempre estas instrucciones en lugar seguro y accesible para futuras consultas.
  • Page 26: Instrucciones De Seguridad

    – entornos de tipo residencial. No cambie las especificaciones de este aparato. • La presión de agua de funcionamiento (mínima y • máxima) debe estar entre 0.5 (0.05) / 8 (0.8) bares (MPa) Siga el máximo número de ajustes de 13 cubiertos.
  • Page 27 ESPAÑOL compatibles con los valores eléctricos del suministro eléctrico. • Utilice siempre una toma con aislamiento de conexión a tierra correctamente instalada. • No utilice adaptadores de enchufes múltiples ni cables prolongadores. • Asegúrese de no provocar daños en el enchufe ni en el cable de red. Si es necesario cambiar el cable de alimentación del aparato, debe hacerlo el centro de servicio técnico...
  • Page 28: Descripción Del Producto

    2.6 Desecho • Corte el cable de conexión a la red y deséchelo. ADVERTENCIA! • Retire el pestillo de la puerta para Existe riesgo de lesiones o evitar que los niños y las mascotas asfixia. queden encerrados en el aparato.
  • Page 29: Panel De Control

    ESPAÑOL 4. PANEL DE CONTROL Botón de encendido/apagado Tecla Start Tecla Programs Indicadores Indicadores de programa Tecla Options Pantalla Tecla Delay 4.1 Indicadores Indicador Descripción Fase de lavado. Se enciende durante la fase de lavado. Fase de secado. Se enciende durante la fase de secado. Indicador TimeManager.
  • Page 30 Programa Grado de sucie‐ Fases del programa Opciones Tipo de carga • Suciedad nor‐ • Prelavado • TimeManager • Lavado a 50 ºC • XtraDry • Vajilla y cubier‐ • Aclarados • Secado • Todo • Prelavado • XtraDry •...
  • Page 31: Ajustes

    ESPAÑOL Agua Energía Duración Programa (kWh) (min) 13 - 14 1.0 - 1.1 75 - 85 1) La presión y temperatura del agua, las variaciones del suministro de energía, las opcio‐ nes y la cantidad de platos pueden alterar los valores. 5.2 Información para los En su solicitud, incluya el código de número de producto (PNC) que se...
  • Page 32 Cuanto mayor sea el contenido de El ablandamiento del agua dichos minerales, más dura será el agua. dura aumenta el consumo La dureza del agua se mide en escalas de agua y energía, así como equivalentes. la duración del programa.
  • Page 33 ESPAÑOL 6.3 La notificación de abrillantador vacío El abrillantador permite que la vajilla se seque sin rayas ni franjas. El abrillantador se añade automáticamente durante la fase de aclarado caliente. Cuando el depósito de abrillantador está vacío, el indicador se enciende para solicitar que se rellene.
  • Page 34: Opciones

    2. Pulse Delay para cambiar el ajuste: 3. Pulse encendido/apagado para confirmar el ajuste. = AirDry desactivado. 7. OPCIONES y no es necesario seleccionarla en cada Cada vez que inicie un ciclo. programa debe activar las En los otros programas, el ajuste de opciones que desee.
  • Page 35: Antes Del Primer Uso

    ESPAÑOL 8. ANTES DEL PRIMER USO 1. Asegúrese de que el nivel actual 4. Agite cuidadosamente el embudo por del descalcificador coincide con la el asa para hacer que entren los dureza de su suministro de agua. últimos granos. De lo contrario, ajuste el nivel del 5.
  • Page 36: Uso Diario

    1. Pulse la tecla de apertura (D) para abrir la tapa (C). 2. Vierta el abrillantador en el dosificador (A) hasta que el líquido alcance el nivel 'max'. 3. Limpie las salpicaduras de abrillantador con un paño absorbente para evitar que se forme demasiada espuma.
  • Page 37 ESPAÑOL 9.2 Ajuste e inicio de un Apertura de la puerta mientras programa está funcionando el aparato Si abre la puerta mientras se realiza un La función Auto Off programa, el aparato se detiene. Puede afectar al consumo de energía y a la Esta función reduce el consumo de duración del programa.
  • Page 38: Consejos

    1. Pulse la tecla de encendido/apagado Fin del programa o espere a que la función Auto Off desactive automáticamente el Cuando haya finalizado el programa de aparato. lavado, la pantalla mostrará 0:00. Los Si se abre la puerta antes de la Indicadores luminosos de fase están...
  • Page 39: Mantenimiento Y Limpieza

    ESPAÑOL • No lave en el aparato objetos que • La tapa del depósito de sal está puedan absorber agua (esponjas, apretada. paños de limpieza, etc.). • Los brazos aspersores no están • Quite los restos de alimentos grandes obstruidos. de los platos.
  • Page 40 7. Vuelva a montar los filtros (B) y (C). 8. Vuelva a colocar el filtro (B) en el filtro plano (A). Gírelo hacia la derecha hasta que encaje. 2. Extraiga el filtro (C) del filtro (B). 3. Retire el filtro plano (A).
  • Page 41: Solución De Problemas

    ESPAÑOL 11.4 Limpieza del interior larga duración al menos dos veces al mes. • Limpie cuidadosamente el aparato, • Para mantener el funcionamiento incluida la junta de goma de la puerta, óptimo del aparato, se recomienda con un paño húmedo. utilizar un producto específico de •...
  • Page 42 Problema y código de Causa y soluciones posibles alarma El aparato no desagua. • Compruebe que el desagüe no esté obstruido. • Asegúrese de que el filtro de la manguera de salida La pantalla muestra no está obstruido. • Compruebe que el filtro de desagüe no está obstrui‐...
  • Page 43 ESPAÑOL vuelve a producir, póngase en contacto Consulte otras posibles con un Centro de servicio técnico. causas en "Antes del Para los códigos de alarma no descritos primer uso", "Uso diario" en la tabla, póngase en contacto con un o "Consejos". Centro de servicio técnico.
  • Page 44 Problema Causa y soluciones posibles Espuma inusual durante el • Utilice solo detergentes adecuados para lavavaji‐ lavado. llas. • Hay una fuga en el dosificador de abrillantador. Póngase en contacto con un servicio técnico auto‐ rizado. Rastros de óxido en los cu‐...
  • Page 45: Ficha De Información Del Producto

    13. FICHA DE INFORMACIÓN DEL PRODUCTO Marca registrada Electrolux Modelo ESF5533LOX 911516303 Capacidad asignada (número de cubiertos tipo) Clase de eficiencia energética Consumo de energía en kWh al año, basado en 280 ciclos de lavado normal, utilizando agua fría y el consumo de los modos de bajo consumo.
  • Page 46 Suministro de agua máx. 60 °C Agua fría o caliente 1) Consulte los demás valores en la placa de características. 2) Si el agua caliente procede de una fuente de energía alternativa (por ejemplo, paneles solares), utilice la toma de agua caliente para reducir el consumo de energía.
  • Page 47 ESPAÑOL...
  • Page 48 www.electrolux.com/shop...

Table of Contents