Blending After Steaming - Philips AVENT SCF883/03 User Manual

13
Turn the control knob back to the off position (OFF)� Wait 2 minutes, or until
there is no more steam coming from the top of the appliance before removing
the jar�
Caution
• If you intend to start another steaming cycle, let the appliance cool down for
10 minutes, and empty any remaining water out of the water tank before you refill
and start a new steaming cycle.
14
To blend the steamed ingredients, refer to chapter "Blending after steaming".
15
There may still be some water remaining in the water tank after a steaming cycle�
This is normal� Wait until the appliance cools down to room temperature, then
empty the water tank of all residual water� To empty or clean the water tank,
refer to the chapter "Cleaning and descaling".

Blending after steaming

Caution
• The jar and the lid will become hot after the steaming cycle. Only hold the jar by the
specially designed heat-resistant handle.
• Always make sure that the lid of the jar is correctly closed and locked in place while the
appliance is in use.
• Always make sure that the jar lid has cooled down after steaming before you open
it to add more ingredients (do not fill the jar past the top edge of the plastic part of
blade unit), or to remove the remaining water from the jar.
• If you have added additional liquids, never put the jar in the steam position, as the
liquid will go through the sieve.
- 16 -