Table of Contents
Advertisement
Problem
The blending
function does not
work.
The appliance
makes a lot of
noise, produces an
unpleasant smell,
is hot to touch,
emits smoke, etc.
The appliance
produces a lot
of noise and
vibration during
blending.
Temperature of
the defrosted food
is still low.
Possible cause
The sealing ring
around the jar lid is not
assembled correctly or is
not assembled.
There is too much food
in the jar.
The jar is not placed on
the main unit correctly.
The jar lid is not locked
onto the jar correctly.
You are using the
appliance to blend sticky
food such as cheese.
You have been using
the blending function
continuously for more
than 30 seconds.
There is too much food
in the jar.
You have been using the
blending function for too
long�
The sieve is not attached
to the jar lid.
There is too much food
in the storage pot.
Solution
Make sure the sealing ring is correctly
assembled around the jar lid with the flat
side facing out.
Switch off the appliance and process a
smaller quantity. Raw food put in the jar
should not exceed top of the blade unit.
Place the jar on the main unit with the
lid on the top, align the
with the
icon on the main unit, and
turn the jar clockwise to securely lock it in
place on the main unit.
Place the jar lid on the jar and turn it
clockwise to close it securely.
Check the recipe booklet and use
appropriate ingredients to blend.
Stop blending and let the appliance cool
down for a few seconds and then start
blending again.
Switch off the appliance and process a
smaller quantity.
Do not let the appliance blend
continuously for more than 30 seconds at
a time�
Make sure that the sieve is attached to the
jar lid.
Make sure that the amount of food in
the storage pot does not exceed the
maximum scale marked on the side of the
pot.
- 33 -
icon on the jar
Advertisement
Table of Contents
