Pairing The Scanner With Bluetooth ® Devices - Honeywell 1602-B User Manual

Pairing the Scanner with Bluetooth
The scanner can be paired with Bluetooth devices such as personal computers, laptops, tablets, and Apple® devices.
1. Scan the appropriate Bluetooth Connect bar code below to establish one-way communication with the Voyager 1602g.
Bluetooth HID Keyboard
Connect
Note: If you want to use an Apple app or you are a developer creating an Apple app to communicate with the VG1602g, you
would use SPP to establish two-way communication to control the scanner through that application. See
Scanner with an Apple Device Using SPP
2. Set your personal computer, laptop, tablet, or Apple device so it searches for other Bluetooth devices. (Refer to your
device's User's Guide for pairing instructions.)
3. Once your personal computer, laptop, tablet, or Apple device has located the scanner, select the scanner name. Some
personal computers, laptops, or tablets will automatically pair with the scanner. If your device automatically pairs with the
scanner, it displays a successful pairing message and you do not need to continue to the next step.
4. If your personal computer, laptop, or tablet does not automatically pair with the scanner, a PIN is displayed. This PIN must
be scanned within 60 seconds. You must quickly scan Bluetooth PIN Code below, then scan the numeric bar code(s) for the
PIN code from the chart below, then scan the Save bar code.
Bluetooth PIN Code
1
3
The HEC and TEC codes identified in this watermark supersede any conflicting HEC or TEC codes displayed in the drawing.
Devices
®
on page 1-4.
Bluetooth HID Japanese
Keyboard Connect
Pairing the
0
2
1 - 3