4
Input/Output Settings
Programmable Button
The second, smaller button on the scanner can be programmed so that pressing the button displays a virtual keyboard on the
host, displays the battery charge status, puts the scanner into flashlight mode, or pairs and unpairs the Bluetooth connection
between the scanner and the host. You may program one of these selections to occur after a short button press, and another
selection to occur after a long button press. The scanner emits a short beep to let you know when the button has been held
down long enough.
Virtual Keyboard
Once your scanner has been connected directly to an Apple® iPad, smart phone, or laptop, you can toggle the virtual key-
board on the host with either a short or a long press of the programmable button.
Note: This feature is only supported with Apple devices.
Virtual Keyboard On -
Short Press
The HEC and TEC codes identified in this watermark supersede any conflicting HEC or TEC codes displayed in the drawing.
Programmable button
Virtual Keyboard On -
Long Press
4 - 1