Table of Contents
Advertisement
StarBoard FX-79E2/89WE2
- Select a level and stable position.
- Do not set it up near equipment that might generate electromagnetic waves
or
radio frequencies, such as radio transmitters, televisions, copying machines
or air
conditioners.
- Avoid locations that are dusty, that are subject to extremely high or low
temperatures or humidity, or that are exposed to direct sunlight.
Do not touch board at the time of plugging USB cable.
It may cause of malfunction.
Do not scrape or strike the board surface by stylus pen.
Failure to comply may result in damage on the board surface.
Use an input tool with a thickness of least 10 mm.
When inputting to this product, use a tool that is at least 10 mm. If a pen or
similar tool with a thickness of less than 10 mm is used, the input will be
unstable.
Also, do not use tools with a sharp tip, such as a ballpoint pen. If such a tool is
used incorrectly, it could damage the surface of the board.
NOTICE
Notice Contents
11
Contents
Safe Handling
Page(s)
P.1-6
P.1-12
P.2-1
P.2-1
English
Advertisement
Table of Contents
