Speaker - HP Compaq dx6050 MT Reference Manual

6.17 Speaker

1. Prepare the computer for disassembly
2. Remove the access panel and rotate the computer so the system board is parallel to the table
to make it easier to work on
3. Move/remove any components necessary to gain access to the speaker.
4. Disconnect the speaker wire from the system board connector.
5. Remove the four screws 1, that secure the speaker to the chassis.
6. Remove the speaker 2.
To install the speaker, reverse the removal procedures.
Service Reference Guide, d300, dx6050
Removal and Replacement Procedures— Microtower (µT) Chassis
(Section 6.1, "Preparation for
(Section 6.4, "Access Panel").
319865-008
Disassembly").
6–33