Front I/O Devices - HP Compaq dx6050 MT Reference Manual

Removal and Replacement Procedures— Desktop (DT) Chassis

8.11 Front I/O Devices

1. Prepare the computer for disassembly
2. Remove the computer cover
3. Disconnect the two I/O device cables from the system board: the front USB cable pair and
the front audio cable.
4. Remove the 5.25" drives from their bays to gain access to the I/O device
"Removing a
5. From the inside of the chassis, remove the two screws that secure the I/O device to the
chassis 1, then pull the device into the chassis 2 to free it from its mount.
To install the housing assembly, reverse the removal procedures.
8–24
(Section 8.5, "Computer
Drive").
(Section 8.1, "Preparation for
Cover").
319865-008 Service Reference Guide, d300, dx6050
Disassembly").
(Section 8.10.2,