HP Compaq Presario,Presario 5095 Quick Start Manual page 69

Symptom
Disk drive cannot save
information to disk, cont.
Disk drive cannot read a disk.
Symptom
Screen is blank, and monitor
power light is not lit.
Screen is blank.
M P —G S
Y RESARIO ETTING TARTED
Problem
File Save command not properly
executed.
Disk drive has failed.
Disk is not formatted.
Problem
Monitor power cable is not
connected to the monitor or to
the wall outlet.
Monitor is not turned on.
Monitor connector cable is not
properly connected to the back
of the computer.
Screen saver is enabled.
Computer is in Sleep mode, as
shown on the keyboard
LED panel.
If you have a flat-panel monitor
(available on select models), you
may need a Digital Video Interface
and connector.
. . /
WWW COMPAQ COM CONSUMERSUPPORT
Solution
When saving information to the disk
drive, verify that you are using the
correct drive letter.
Call Compaq Technical Support. Refer
to your Certificate of Warranty
for details.
To format the disk:
1. On the Windows desktop,
double-click the My Computer
g
icon.
2. Select the disk (A) drive.
3. Click File, and point to Format.
4. Select the desired options, and
click Start to begin formatting
the disk.
Solution
Reconnect the power plug on the back
of the monitor and on the wall outlet.
Press the Power button on the front of
the monitor.
Inspect the monitor video connector
for bent pins. If no pins are bent,
reconnect the monitor connector cable
on the back of the computer.
Press any key or move the mouse to
make the screen display visible again.
See Waking Your Computer in the
"Using Your Computer" chapter
in this guide.
Refer to your Certificate of Warranty
for details.
N
EED
S H ? 6-9
OME ELP