Canon imagePROGRAF iPF825 Setup Manual page 9

For TCP/IP (Network) Connections
When you fi rst connect the printer to the network
1
Use the LAN cable to connect the LAN
port on the back of the printer to the hub
port.
• If the printer is on, the Link indicator is
green for 100Base-TX connections and
MEMO
amber for 10Base-T connections.
4
Confi rm that the required installation
items are selected in the Installation
List window, and then click Next.
• Point at a software title to view a summary
of the software.
MEMO
7
On the Printer Selection window, select
The printer is connected to computers
in a network and click Next.
10
In the Method of Confi gurating IP
Addresses window, enter the IP
address in Confi gure manually, under
Method of Confi guring IP Addresses.
Click Install to start the installation
process.
Also enter your preferred name for
the printer in Device Name and the
installation location in Printer Location
under Information About Printer to
Confi gure, as desired.
The installation process will now begin.
2
Make sure the printer is on. Turn the
computer on and insert the provided
User Software CD-ROM for your
particular operating system in the CD-
ROM drive.
5
On the Select Country or Region of
Use window, select the country or region
of use and click Next.
8
After reading the precautions in the
Getting Ready window, select Find
available printers in the network and
click Next.
• If you use a DHCP server for automatic assignment of the printer's IP address,
printing may no longer be possible after the printer is turned off and on. This is
because an IP address different from before has been assigned. Thus, when using
DHCP server functions, consult your network administrator and confi gure the
settings in one of the following ways.
• Confi gure the setting for dynamic DNS updating
In RemoteUI, activate the setting Enable DNS Dynamic Update. (→"Confi guring the Printer's TCP/
IP Network Settings," User Manual)
• Confi gure the setting for assignment of the same IP address each time the printer starts up
9
3
In the Setup Menu window, click Install
Printer Driver .
• To choose a different language, click
Language .
MEMO
6
After reading the license agreement,
click Yes.
9
Available printers are listed in the
Search Results window.
Select the desired printer in the Printer
List. In Method of Printer Selection,
select Use the selected printers, and
then click Next.
• If the printer you want to use is not
displayed in Printer List, refer to "When
MEMO
the printer cannot be found on the network"
on page 10 to setup and confi gure an IP
address for the printer.