Chapter 8
Changing The Machine Settings (MP170)
Changing The Settings
This section describes the procedure to change the settings in the <SYSTEM SETTINGS> menu,
taking the steps to specify <EXTENDED AMOUNT> as an example.
1
Press [ON/OFF] to turn ON the machine. (See page 14)
2
Press [Menu] repeatedly until <SYSTEM SETTINGS> appears.
3
Use [
] or [
4
Use [
] or [
EXTENDED AMOUNT
5
Use [
] or [
Note
PRINT SETTINGS
QUIET MODE
Use this function if you want to reduce the operation noise, such as when printing at night: ON/
OFF
Important
EXTENDED AMOUNT
Selects the amount of image that extends off the paper when printing in borderless: SMALL/
LARGE
Chapter 8
] to select <PRINT SETTINGS>, then press [OK].
] to select <EXTENDED AMOUNT>, then press [OK].
SMALL
] to select <SMALL> or <LARGE>, then press [OK].
Depending on the functions you use, some setting items cannot be
specified in combination.
The printing speed may be reduced compared to when this setting is
set to <OFF>.
This function may not be so effective depending on the Image Quality
setting.
Certain noise, such as when the machine is preparing for printing, is
not reduced.
Changing The Machine Settings (MP170)
65