Table of Contents
Advertisement
Before Installing the Product
WARNING
• Never install on the cover of an airbag or at locations that might obstruct the deployment of the airbag.
Doing so might prevent the airbag from being deployed normally, cause the product to fly out due to
airbag deployment, and cause accident and injury.
• First check with the vehicle manufacturer for precautions related to the installation work when installing
the product in a vehicle equipped with airbags. Otherwise there is a risk of airbag malfunction.
CAUTION
• Always use the included parts as specified. There is a risk of product failure if other parts are used.
• Install this product in a location where it will not hinder vehicle equipment and the ability to drive the
vehicle.
Installation Precautions
• The main unit is for installation to the inside of the front window only. Do not install it anywhere else
inside or outside of the vehicle.
• When installing the main unit to the inside of the front windshield, be sure to install it to the
specified positions of the front windshield and within the specified dimensions.
• Make sure that the surface of the front windshield is clean and dry before attaching the mounting
cradle.
• Depending on the vehicle, installation at the specified location and within the specified dimensions
may not be possible. For details, consult with your dealer.
• Do not cover the main unit or get the lens dirty.
• Do not place reflective objects near the lens.
• Take care when handling the main unit that it does not drop and you do not touch the lens.
• Recording quality may be affected if the front windshield of the vehicle is coated or has been
specially treated.
• Choose a working location free from dust and debris in the air.
• When the temperature is low or there is condensation on the glass, turn on the heater and defroster
to warm up the window in order to prevent poor adhesion of the mounting cradle.
• To avoid the windshield mounted cradle from detaching, you may attach the safety strap (included
in the box).
Installation Tips
Before Installing and Securing the Product
• First, temporarily connect this product and confirm that it operates correctly, and then install it. If the
product does not operate correctly, check whether there is a mistake in the connection.
Before Applying Mounting Cradle
• Clean the location where the mounting cradle will be applied.
CAUTION
• Install firmly so that it does not come off. Incorrect installation may cause this to detach while driving
and cause an accident. Inspect the installation state from time to time.
− 15 −
Advertisement
Table of Contents
