Pioneer VREC-130RS Owner's Manual page 19

5 Turn the vehicle engine on to display the recording screen.
Note
A protective film is applied to the lens when the product is purchased. Peel off this film.
6 Installing the Safety Strap.
1 Hook the smaller loop of the safety strap around the Mounting Cradle where it connects to the
Main Unit, and then connect the Mounting Cradle to the Main Unit.
2 Hook the larger loop of the Safety Strap around the Rear View mirror attached to the windshield.
3 Once the Safety Strap is connected to both the Rear View Mirror and the Dash Camera, attach
the Dash Camera to the front windshield close to the location of the Rear View Mirror.
Note
Always install this Safety Strap as described. Do not cut the Safety Strap or install it in any other way
than as described. Pioneer is not liable for any damage, due to installation other than described, or
use of the product.
7 Removing this product.
1 Unhook the mounting cradle from the windshield.
2 Remove this product.
− 19 −