Table of Contents
Advertisement
Guide rail-mounting
Huawei does not provide the SmartLogger guide rail. If the customer chooses this installation mode,
the customer must prepare a 35 mm standard guide rail.
Unit: mm
1. Remove the mounting ears from the
SmartLogger using a Phillips screwdriver.
3. Mount the SmartLogger onto the guide rail.
NOTE
1. Secure the guide rail before mounting the
SmartLogger.
2. Verify that the length of the guide rail is
sufficient for securing the SmartLogger. The
recommended length is 450 mm or greater.
2. Secure the guide rail clamps using the screws
that are removed from the mounting ears.
4. Install guide rail fasteners.
8
Advertisement
Table of Contents
