Canon VarioPrint 6000 Series Operation Manual page 192

Change the print quality settings
Advanced settings
[RIP resolution] (default
[600x2400] dpi)
[RIP raster] (default
[LINE_200LPI])
NOTE
You cannot change this setting for the active print job .
Procedure
1. On the control panel, touch [Jobs] -> [Queues] -> [Scheduled jobs] or [Waiting jobs], or select a
DocBox.
2. Touch the job you want to change.
3. Touch [Edit], or double-tap the job to open the [Edit] window.
4. Touch [Print quality].
5. Make the required changes.
6. Touch [OK].
192 Chapter 9 - Carry out print jobs
Description
The RIP resolution can improve the readability of fine details.
When you print very thin, slanted lines, for example in Chinese
characters, 1200x1200 gives the best result. 600x2400 is best suit-
ed for mainly horizontal and vertical objects.
The default raster is [LINE_200LPI]. This is best suited for over
most of the prints. In special cases, for example moiré patterns
from scanned images, you can try to improve the print result with
the [DOT_200LPI] raster or even the [DOT_125LPI] raster. However,
then you may loose some fine details.
The raster screen for PS/PDF jobs is [LINE_200LPI]. All raster
screens are compatible with resolutions of 600x2400 dpi and
1200x1200 dpi.
VarioPrint 6000 line