Table of Contents
Advertisement
Figure 4 Installing the power supply into a vertical slot
5.
Press the handle back into the notch of the power supply.
6.
Use the Phillips screwdriver to fasten the captive screw on the handle to fix the
power supply.
Connecting the power cord
WARNING!
Make sure that each power cord has a separate circuit breaker.
•
Turn off the circuit breaker before you connect the power cord.
•
To connect the power cord:
1.
Plug the connector of the DC power cord supplied with the power supply into the
receptacle of the power supply.
2.
Fasten the screw of the power cord to prevent a falloff.
7
Advertisement
Table of Contents
