3-2
For Remote Shutdown
Nut
Screw
RS485
communication
board
4
Connect DRED terminal to the right position onto the inverter.
2.6 WiFi & WiFi/LAN Module Connection
2.7 Earth Fault Alarm Connection
The inverter complies with IEC 62109-2 13.9. Fault indicator LED on inverter cover will light up and
the system will email the fault information to customer. It must be installed in a high traffic area
where the LED would be noticed.
Inverter should be installed at eye level for convenient maintenance.
Screw Cap
Insulator
Single hole
Cable
seal ring
1. Put the cable through the plate.
2. Wiring from the No. 5 and 6 holes
respectively
NO
5
6
Function
REFGEN
COM /DRMO
18