LG S3RF Owner's Manual page 19

global_main.book.book Page 18 Thursday, August 13, 2020 5:29 PM
EN 18 INSTALLATION
• The use of the anti-tip device does not preclude
tipping of the appliance when it is not properly
installed.
Assembling the drip tray
Before using the appliance, insert the drip tray
onto the bottom of the cabinet.
1
Hold the tray so the arrow and letter on the
front of the tray face up.
2
Insert one side of the tray first, then the other.
Push the tray until it slides completely in.
3
To detach, pull one side out then the other.
• If the tray collects water, detach it and empty
the water. After emptying it, reassemble the
tray.
CAUTION
• Do not operate the appliance without installing
the drip tray. Doing so could lead to water
damage caused by leaking.
Installing cap covers
1
Line up the nubs on the cap cover with the
holes in the top corner of the cabinet and then
snap the cap cover into place.
2
Repeat with the remaining cap cover on the
other corner.
Installing hinge covers
1
Open the appliance door.
2
Snap the hinge cover onto the upper hinge
assembly with the bent edge on the far side
from the hinge.
3
Repeat with the remaining hinge cover on the
lower hinge assembly.