Advertisement
1 Drilling the Installation Holes
a
b
Opening the Case
Open the cap, use the key to unlock the FAT, hold the key, open the buckle w ith your hands, unbuckle the FAT, and open
the FAT cover.
Cap
2 Leading in, Stripping, Securing and Coiling Distribution Cable
Remove the velcro strap and transparent cover on the splicing tray, then turn over the splicing trays and fiber distribution
panel.
Transparent cover
Velcro strap
•
T he maximum turnover angle of fiber distribution panel is 120°.
•
T he maximum turnover angle of splicing tray is 90°.
Lead in the distribution cable through the cable hole on the sealing block.
Determine the length to be stripped from the optical cable, mark the position to be stripped, and strip the optical cable.
Distribution cable
70 to 100
Key
Aramid fiber
Loose tube
210
Splicing trays
1800
Bare fiber
3
Fiber distribution panel
Unit: mm
Advertisement
